Home > Products > Digital Imaging Test Solution > VC-118-S Camera Test Cabinet
VC-118-S Camera Test Cabinet
VC-118-S camera test cabinet is the latest product developed by 3nh.This product can test lens of different angles but using the same chart.Built in mobile slider, you can easily move the lens back and forth.VC-118-S equipped with LED lamps with high color rendering index, no flicker, long life and stable color temperature.The user can rotate the light plate in any direction according to the different situations, so as to obtain a more uniform lighting environment.
Product Specification
1. Outline Dimension(Figure 2):1150mm*1045mm*1728mm
2. Inner Dimension:1106mm*1001mm*800mm
Window Dimension:447mm*700mm
3. Connector installation plate Dimension:250mm*150mm Connector installation plate consist of :1 RS232 connector,1 AV seat,2 USD connector,2 Cable base,2 DC seat,1 trachea quickfit PM06
4. Lamp Control Box Dimension(Figure 4):508mm*248mm*131mm
5. Operating Temperature:0~40℃ the relative humidity is less than 85% (non condensing)
6. Input Voltage:AC22OV,50/60Hz maximum power consumption is 160W
7. Net Weight:130kg
Attention
1.Pay attention to the proper power supply and check the power label on the back of the light box before use
2.The minimum distance between each light box or between the light box and the wall should be 20cm.Ensure safe distance between light boxes and flammable and combustible materials.
3.The light box can not be used in the environment with explosive danger
4.Do not place the product in net water or water sprinkling.Keep thesurrounding environment dry.
5.Use clean, lint free white cloth with a small amount of neutral detergent water or water to remove the surface of the lamp box stains,don't wipe with chemical solvent and scratch with hard material
6.Pls cut off the power before repairment and replacing the lamp
Function introduction
1. The color of the box surface is neutral gray
2. Use the black cloth covering the window,which is easy to open and close.Close the curtains to ensure working environment without external influence while testing.
3. Inside the box, a camera moving platform is installed in the middle .There are 2 straight rails with lock on the platform.The platform can move backwards and forwards,it can also be moved to a certain place to lock the slide rail.
Installed LED lamps with high color rendering index, standard color temperature and no strobe on the left and right sides of the mobile platform,the illumination of the light source is adjustable.Two light rail with locking line are installed under the LED light source panel .It can move backwards and forwards and also can be moved to a certain place to lock the slide rail.Loosening the butterfly hand nut on the lamp holder,LED light source plate can be rotated to adjust the angle,which make the light source more uniform.Tighten the butterfly nut fixed position after determining the angle.
The light source control of VC-118-S (Figure 8) is as follows
1. Connecting the power cables of the left and right two LED lights to the LED power supply line plug 1 and 2 of the light source control box,regardless of the lefe and right sides abut the connecting cable!
2. Connecting the 220V power line to the light source control box socket
3. Turn on 1 way light source power switch,rotate 1 way light source dimming knob,control the brightness of the 1way LED light source in the left and right sides of the light plate.Clockwise rotation of light source from dark to bright.The counterclockwise rotation of the light source starts from the light.Dimming knob is divided into two levels to control,first twist the knob 1, then twist the knob 2.The same way to control other 3 LED light sources
Light Source Instruction
The standard lamp of VC-118-S is D65 LED light source with 6500K + 200K color temperature.The user can configure the light source according to the requirements (like the following table)
| color temperature | Ra |
| 7500K±200K | >91 |
| 6500K±200K | >94 |
| 5000K±200K | >95 |
| 3000K±200K | >95 |
| 2800K±200K | >95 |
Camere Testing
VC-118-S camera test cabinet can test lens of different angles but using the same chart.The maximum dimension of chart you can use in this cabinet is 2X(712mm*400mm)ISO 12233 Resolution Test Chart.Except this,it is also suitable for other chart to test wide-angle lens and fisheye lens.All the chartsi is magnetic,and can be placed in any position of the cabinet according to user needs.
Wide angle lens test (Figure 9) Fisheye lens test (Figure 10)
Maintenance
1. The warranty time is 1 year
2. Pls cut off the power before repairment and replacing the lamp
3. Use clean, lint free white cloth with a small amount of neutral detergent water or water to remove the surface of the lamp box stains,don't wipe with chemical solvent and scratch with hard material
4. If the surface coating of the cabinet is damaged or discolored, it should be replaced
Packing List
| Name | Quantity |
| Cabinet | 1 |
| Light source plate | 1 |
| Work platform | 1 |
| Lamp control box | 1 |
| Light source connecting cable | 2 |
| Bracket | 1 |
| Power line | 1 |
| Operation Manual | 1 |